GeckoTeq Zelfklevende DiBond Glas Forex Spiegel Hanger- per 1

Now also available in super affordable bulk packaging from 50 pieces! > geckoteq -100-dibond-glas-forex-mirror-hanger-in-bulk.html#/carrying capacity-1kg">Click here for more info.

The GeckoTeq self-adhesive DiBond Multi Hook is a hanging system that has been specially developed for hanging flat plates such as Mirrors, Perspex, DiBond, Forex, Trespa, Triplex and (acrylic) plates. The most beautiful memories captured on acrylic or dibond deserve a nice spot on the wall in your home or office.
The GeckoTeq Dibond Multi-Crochet set is easy to install self-adhesive and is a safe and almost invisible system by using perlon cords. Please note - these hooks must be mounted on a surface that has been made grease-free and are not suitable for fibrous or porous surfaces such as MDF, raw wood, plasterboard or plaster blocks.
The GeckoTeq Multi-hook can also be used in combination with a hanging rail, plus this set is also suitable for hanging several plates underneath each other.
The GeckoTeq Dibond Multi Hook Set consists of: 1 x self-adhesive panel hook
The illustrated bumpers, wall brackets, screws and plugs must be ordered separately.

Note: Not only the weight of the panel to be hung is important, but also the size. For a panel wider or longer than 50cm, 2 Multi-hooks of at least 80 x 80mm must be chosen and for a panel wider or longer than 100cm 2 Multi-hooks of at least 100 x 100mm. In addition, each hanger must also be able to support the total weight of the object.

Available:
45 x 45mm = 1.0kg
40 x 80mm = 2.0kg
80 x 80mm = 4.0kg
100 x 100mm = 6.0kg
100 x 200mm = 12.0kg
180 x 180mm = 18.0kg

The load-bearing capacity depends on many factors, such as the substrate and the material of the (photo) panel itself. It is also very important to thoroughly clean the surface to be covered with an alcohol cleaner and to wait at least 24 hours before hanging the object.